Building Commissioning
ASHRAE Technical Committee 7.9

Scope of TC 7.9

TC 7.9 is concerned with methods of developing and executing the commissioning process as required to provide HVAC and related systems which conform to design intent and project requirements.

Handbook

The ASHRAE Handbook is published in a series of four volumes, one of which is revised each year, ensuring that no volume is older than four years.

The Handbook can be purchased at the ASHRAE Bookstore by clicking on this link.  TC 7.9 is responsible for the following chapter in the HVAC Applications Handbook:

HVAC APPLICATIONS:  HVAC Commissioning
Commissioning implements a quality-oriented process for achieving, verifying, and documenting that the performance of facilities, systems, and assemblies meets defined objectives and criteria. The defined objectives and criteria are often referred to as the owner’s project requirements (OPR). The commissioning process uses the owner’s project requirements as the reference to determine acceptance of the design and construction. Commissioning includes verifying and documenting that the project operational and maintenance documentation and training of operation and maintenance personnel occur. The result should be fully functional systems that can be properly operated and maintained throughout the life of the building. This chapter gives an overview of the general commissioning process as covered in ASHRAE Guideline 0-2013, developed for the National Institute of Building Sciences’ total building commissioning program, as well as the best practices for applying the process from ASHRAE Guideline 1.1-2007. The minimum acceptable process for commissioning is detailed in ASHRAE Standard 202-2013. This chapter provides more narrative discussion on some issues than these two guidelines and the standard.

The ASHRAE HVAC APPLICATIONS HANDBOOK may be purchased from the on-line bookstore by clicking on the highlighted text.

Comment on the Handbook: ASHRAE welcomes your comments on the Handbook or a specific Handbook chapter.  To submit a comment about any aspect or part of the Handbook series, you can use the Handbook Comment Form.

Review a Handbook Chapter: To provide your feedback about a specific Handbook chapter, you can answer the brief survey questions on the Handbook Chapter Review Form.

Programs

Technical committees develop and sponsor technical sessions at the winter and annual conferences. Information about their future technical program is discussed at each TC meeting and at the TC’s Program Subcommittee meeting.

ASHRAE publishes papers and transactions from presentations at its conference events. In addition, ASHRAE records most of the seminar sessions from its conferences on DVD. These DVDs are ideal for use at chapter meetings, in university courses, or company lunch and learns. Products available from the most recent conference may be found here.

TC 7.9 Sponsored Programs at ASHRAE Conferences

Research

Technical Committees are responsible for identifying research topics, proposing research projects, selecting bidders, and monitoring research projects funded by ASHRAE. Information about their specific research program is discussed at each TC meeting and at the TC’s Research Subcommittee meeting.

Click here for the TC Research planning page

TC 7.9 co-sponsors the following on-going research project:

1633-RP: DATA AND INTERFACES FOR ADVANCED BUILDING MAINTENANCE AND OPERATION
Develop a set of standard data-driven metrics, interfaces and dashboards for advanced building operation and management, segmented by building typology and stakeholder needs; proto-type those dashboards, document methods of data collection, and test those metrics with real building data. Provide this body of work to help fill the void in standards literature for informing designers and practitioners on how they can use building data to improve building operations, energy efficiency, comfort, and sustainability.

Standards

ASHRAE writes standards for the purpose of establishing consensus for: 1) methods of test for use in commerce and 2) performance criteria for use as facilitators with which to guide the industry. ASHRAE publishes the following three types of voluntary consensus standards: Method of Measurement or Test (MOT), Standard Design and Standard Practice. ASHRAE does not write rating standards unless a suitable rating standard will not otherwise be available. ASHRAE is accredited by the American National Standards Institute (ANSI) and follows ANSI's requirements for due process and standards development. Standards may be purchased at the ASHRAE Bookstore.

TC 7.9 is cognizant for the following guidelines and standard:

ASHRAE Guideline 0.2: The Commissioning Process for Existing Systems and Assemblies
ASHRAE Guideline 1.1: HVAC & R Technical Requirements for the Commissioning Process
Proposed Guideline: GPC 1.2P: Technical Requirements for the Commissioning Process for Existing HVAC&R Systems and Assemblies
Proposed Guideline 1.3: Building Operation and Maintenance Training for the HVAC&R Commissioning Process
ASHRAE Guideline 1.4: Procedures for Preparing Facility Systems Manuals
ANSI/ASHRAE/IES Standard 202: Commissioning Process for Buildings and Systems

Other Activities

TIP: If MTG involvement add here otherwise leave blank.

TC 7.9 participates in the following multidisciplinary task group:

Operations and Maintenance Activities That Impact Energy Efficiency
MTG.O&MEE will coordinate TC/TG/TRG activities to help support the application of ASHRAE guidelines, Standards and other technical resources to support regulatory bodies, utilities, building owners and others who are attempting to enhance efficiency of existing buildings. Responsibilities include suggestions for research, development and presentation of technical programs of all types on maintenance and its impact on energy consumption and efficiency. It will be especially involved with interactions with those who are introducing and evaluating strategies for building efficiency enhancements.

FAQs

ASHRAE Technical FAQs are provided as a service to ASHRAE members, users of ASHRAE publications, and the general public. While every effort has been made to ensure their accuracy and reliability, they are advisory and provided for informational purposes only, and in many cases represent only one person’s view. They are not intended and should not be relied on as an official statement of ASHRAE. Technical questions not addressed may be submitted to the ASHRAE Technical Services department at tse@ashrae.net.